Pureit Classic Germkill Kit - (upu-Germkill)

Steps to Change the Germkill Kit (GKK)

1. Preparation:

o Empty water from the top and transparent chamber completely.

2. Replace the Activated Carbon Trap:

o Remove the top cover to access the Activated Carbon Trap.

o Rotate the Activated Carbon Trap anti-clockwise and remove it.

o Insert the new Activated Carbon Trap, rotate clockwise, and replace the top cover.

3. Replace the Germkill Processor:

o Remove the Germkill life indicator cover.

o Take out the old Germkill processor.

o Insert the new Germkill processor and push to ensure tightness.

o Refit the Germkill life indicator cover.

4. Replace the Polisher:

o Remove the top and batching chamber and place them in a clean area.

o Wash hands thoroughly.

o Remove the wing nut by turning it anti-clockwise.

o Remove the transparent chamber.

o Turn the lid anti-clockwise to access the Polisher assembly.

o Remove the base nut by turning it anti-clockwise.

o Remove the old Polisher and insert the new one, ensuring the side labeled “This side up” is correctly positioned.

o Tighten the base nut completely.

o Insert the Polisher assembly and rotate the lid to lock it.

5. Reassemble the Unit:

o Place the transparent chamber and tighten the wing nut.

o Reattach the top and batching chamber on the transparent chamber.

6. Final Steps:

o Fill the top chamber with water till the brim.

o Discard the first two cycles of water that collect in the transparent chamber.

Result:

Your Pureit system is now ready for use.