Wireless Light Switch 433MHz Remote Control Lamp LED

Wireless Light Switch 433MHz Remote Control Lamp LED

1/2/3 gang wireless light switch smart RF 433MHz remote control 86 wall panel push button 10A 110V 220V Receiver for LED/fan

Features:

1.Multi switches can control different receivers.Save energy,avoid darkness.

2.Working with all kinds of Lights and Ceiling Fan.LED,CFL,Fluorescent lamp can load 300W,other can load 2500w.

3.It is a 86 wall panel that can be stuck onto anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver.

How to get the signal

Step 1: Press the learning button(on the Receiver) twice. Wait for 3 seconds;

Step 2: Press one button on the remote control. Wait for 3 seconds. Succeed.

How to clear the signal

Only one step :Press the learning button(on the Receiver) 8 times. Wait for 3 seconds;

RF433 controller (Receiver) data

1)Workingvoltage:AC85-240V60HZ/50HZ

2)Workingfrequency:433MHZ

3)Powerconsumptioninstandbymode:<0.3W

4)Loadpower:<1100W

5)Receivingsensitivity:-108dBM

6)Workingway:wirelesscontrol

7)Codingway:learningcode

8)Modulation:ASK

9)Workingtemperature:-10*C~+70"C

10)Size:47.4*42*22.8(mm)

86 Panel data

Wireless wall switch

Size:86mm * 86mm

Type: Wireless Wall Panel Switch------work with your 433mhz receiver,remote

control your device

Frequency:433MHZ

Type of wireless communication: RF

Channel: 1-gang/2-gang/3-gang(depends on your choice)

NOTE:This won't work if you just buy the wireless switch, needs to be used with your 433mhz receiver

433 MHz RF remote control data:

1 Working voltage: DC 12V

2 Power Supply: 23A 12V Battery(not include)

3 Working current: ≤ 10mA

4 Radiation power: ≤ 10mW

5 Timing resistor: 4.7M

6 Modulation mode: ASK (Amplitude modulation)

7 Working Frequency: 433mHz

8 Transmission Distance: 50m (It is the theory distance at the open field)

9 Encoder type: learning code 1527

10 remote control size: 110*38*15mm

11 Work with : 433mhz receiver