Rs 68,000
Description
For sale by
Tharindu Sandaruvan
Stay Alert: Avoid Online Scams
- Never share card details or OTPs, and always verify items in person before payment. ikman does not offer a delivery service. Stay vigilant!
Pioneer SA8500ii Vintage stereo integrated amplifier .not used in 🇱🇰 .good condition .working 💯.Delivery available .
Technical Specifications
Number of Transistors
47
Semiconductors
Main principle
Audio-Amplification
Wave bands
- without
Details
Hi-Fi equipment
Power type and voltage
Alternating Current supply (AC) / 110; 120; 220; 240 Volt
Loudspeaker
- This model requires external speaker(s).
Power out
120 W (150 W max.)
Material
Metal case
from Radiomuseum.org
Model: Stereo Amplifier SA-8500 II - Pioneer Corporation; Tokyo
Shape
Book-shelf unit.
Dimensions (WHD)
420 x 150 x 376 mm / 16.5 x 5.9 x 14.8 inch
Notes
A stereo hi-fi integrated amplifier with power output of 60 watts per channel into 8 ohms (75 watts per channel into 4 ohms). RCA inputs for Phono 1, Phono 2, Tuner and Aux, RCA Rec/Play sockets for 2 tapes, DIN Rec/Play socket for 1 tape. Pre-out and Power Amp In sockets connected by removable U shaped connectors, output connectors for 2 pairs of loudspeakers. 4 AC outlets except Europe model. Bass and Treble tone controls, switches for High and Low filters, Loudness, Muting, Tape Duplicating and Tape monitor. Jack for headphones.
Specification
Semiconductors: Transistors 47, Diodes 29
Power Amplifier Section
Circuitry 2-stage differential amplifier Parallel PP direct-coupled OCL.
Continuous Power Output from 20Hz to 20kHz
(Both channels driven) 60 watts per channel (8 ohms)
75 watts per channel (4 ohms)
Total Harmonic Distortion at 20Hz to 20kHz
Continuous rated power output 0.05%
30 watts per channel power output, 8ohms 0.01%
l watt per channel power output, 8ohms 0.01%
Intermodulation Distortion
Continuous rated power output 0.05%
30 watts per channel power output, 8ohms 0.01%
1 watt per channel power output, 8ohms 0.01%
Frequency Response 5Hz to 100kHz +0dB,-1dB
Input (Sensitivity/Impedance)
POWER AMP IN 1V/50kohms
Output Speaker: A, B, A + B
Headphone: Low impedance
Damping Factor (20Hz to 20kHz, 8ohms) 30
Hum and Noise (IHF, short-circuited, A network) 110dB
Preamplifier Section
Circuitry
Equalizer amplifier: 1st stage differential amplifier 3-stage direct-coupled A class SEPP.
Control amplifier: 1st stage differential amplifier 2-stage direct-coupled, NFB type.
Input (Sensitivity/Impedance)
PHONO 1 2.5mV/50kohms
PHONO 2 2.5mV/50kohms
CARTRIDGE LOAD Both PHONO 1 and 2: 100, 200, 300, 400pF
TUNER 150mV/50kohms
AUX 150mV/50kohms
TAPE PLAY 1 150mV/50kohms
TAPE PLAY 2 150mV/50kohms
Output (Level/Impedance)
TAPE REC 1 150mV
TAPE REC 2 150mV
PRE OUT 1V/2kohms, 6V/2kohms (Max.)
Total Harmonic Distortion
(20Hz to 20,000Hz) 0.02%
Frequency Response
PHONO (RIAA Equalization) 20Hz to 20kHz ±0.2dB
TUNER, AUX, TAPE PLAY 5Hz to 50kHz +0dB, -1dB
Versions/Power Requirements
KU USA / 120V AC 60Hz
KC Canada / 120V AC 60Hz
HG Europe / 220/240V AC 50/60Hz Switchable
S General Export / 110/120/220/240V AC 50/60Hz Switchable
