DBX 234XL -Professional 2/3 Way, Mono 4-Way Crossover
dbx 234XL Stereo 2/3 Way, Mono 4 Way Crossover with XLR Connectors
Features:-
==========
>> XLR balanced ins and outs
>> Mode switches for mono 4-way or stereo 2-way/3-way operation
>> Low frequency summed (subwoofer) output
>> x10 range switch on both channels
>> 40Hz high pass (low cut) filter both channels
>> Phase reverse switch on all outputs
>> Individual level controls on all band outputs
>> 24dB per octave Linkwitz-Riley filters (the professional standard)
>> Stereo/Mono status LEDs indicate the selected mode
>> dbx® 2 year parts and labor as standard
>> CSA NRTL/C approved
>> CE compliant
Specifications:-
================
Input Connectors - XLR
Input Type - Electronically balanced/unbalanced, RF filtered
Input Impedance - Balanced >50k ohm, unbalanced >25k ohm
Max Input - >+21dBu balanced or unbalanced
CMRR - >40dB, typically >50dB at 1kHz
Output Connectors - XLR
Output Type - Impedance-balanced/unbalanced, RF filtered
Output Impedance - Balanced 200 ohm, unbalanced 100 ohm
Max Output - >+21dBu balanced/unbalanced into 2k or greater
Bandwidth - 20Hz to 20kHz, +/-0.5dB
Frequency Response - < 3 Hz to > 90 kHz, +0/-3 dB
Signal to Noise Ratio - Ref: +4 dBu, 22 kHz measurement bandwidth
Signal-to-Noise (Stereo Mode) - >94dB (Low Output), >93dB (Mid Output), >92dB (High Output)
Signal-to-Noise (Mono Mode) - >94dB (Low Output), >94dB (Low/Mid Output), >92dB (High/Mid Output)
Dynamic Range - > 114 dB, unweighted, any output
THD+Noise - < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz
Interchannel Crosstalk - < -80 dB, 20 Hz to 20 kHz
Crossover Frequencies (Stereo Mode) - Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)
Crossover Frequencies (Mono Mode) - Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); High-Mid/High: 450 Hz to 9.6 kHz; Low-Mid/High-Mid: 450 Hz to 9.6 kHz
Crossover Filter Type - Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch - Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch - Inverts the phase at the output, one switch per output.
x1 / x10 Switch - Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch - Selects stereo 2-way or mono 3-way operation and disables all LEDs for controls that are non-functional in the selected mode.
LF Sum Switch - Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode.
Indicators - Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
Operating Voltage - 100-120 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50 Hz
Power Consumption - 15W
Power Connector - IEC receptacle
Dimensions - 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Unit Weight - 4.0 lbs. (1.8 kg)
Shipping Weight - 5.8 lbs. (2.6 kg)
Recommended for: Portable.
- Never share card details or OTPs, and always verify items in person before payment. ikman does not offer a delivery service. Stay vigilant!
- Never share card details or OTPs, and always verify items in person before payment. ikman does not offer a delivery service. Stay vigilant!
Soundmax Ma804 - 4 Channel Professional Amplifier (3200 W)
MEMBERColombo, Musical InstrumentsRs 69,00027 daysDBX DriveRack PA+ - Loudspeaker Management System
MEMBERColombo, Musical InstrumentsRs 75,00032 daysJBL Professional EON715 15
MEMBERColombo, Musical InstrumentsRs 329,00029 daysDbx 215/131 - Dual Channel 15-Band Equalizer
MEMBERColombo, Musical InstrumentsRs 14,00032 days