The MX882 is definitely one piece of gear every audio engineer and musician should always have close at hand. This ultra-flexible, little “life saver” has proven invaluable time and time again in live performances, professional recording studios, CD and digital production facilities, and a variety of other scenarios where the show simply had to go on!
Basically, the MX882 consists of 6 mono channels, which can be used either as a splitter or as a mixer. use Channel 1 with the Split/Mix switch in the out (Split) position. Adjust the Channel 1 Balance/Pan control to set how much of the Left and Right Main Input signal is routed to the Channel 1 mono Output XLR. And you can do the same thing with all 6 of the MX882 channels. In Mix mode, the input signals from any, or all, of the MX882’s 6 channels can be mixed to the stereo Main Output, with their individual Balance/Pan controls determining the signal’s placement within the stereo image.The mono Input signals are still sent to their mono outputs, which means each channel can also be used as an individual matching amplifier. The Level controls for the corresponding channels enable the user to adapt the levels at will, with a maximum gain of +15 dB. Levels used in home-recording can easily be converted into studio levels (+4 dBu), and vice versa.
Ultra-low noise 8 in / 2 out line mixer and 2 in / 8 out line splitter
Each channel can operate independently in mixer or splitter mode
Usable as 6 in / 6 out level matching amplifier or line driver
Converts levels between -10 dBV and +4 dBu
Extremely wide bandwidth for highest signal integrity
6 mono in, 6 mono out, 2 main inputs and 2 outputs
8-segment input/output level meters for all channels
Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
