Bathroom Water Proofing Coating
Posted on 20 Jun 9:14 pm, Delgoda, Gampaha
A flexible cement based of 2 components polymer modified waterproofing coating, suitable for concrete and mortar waterproofing. It is capable to seal pores, voids and cracks when applied forming a layer of flexible membrane when dry.
It is suitable to be applied on concrete and mortar to prevent water infiltration. This coating once applied, seals pores and voids, cracks and hairline cracks of all substrates and yet provides a breathable coating which allows water vapor transmission. This coating acts as a protective layer against aggressive gas such as carbon dioxide and also frost and thawing salts.
Type: Waterproofing coating
Trade Name: Deep Seal Flexi 201
Package size: Comes in 3 sizes as;
1. 33 Kg Pack (Powder 23 Kg + Polymer 10 Kg) for 120 Sq.ft. - for 2 layers
2. 21.5 Kg Pack (Powder 15 Kg + Polymer 6.5 Kg) for 50 Sq.ft.- for 2 layers
3. 7.16 Kg Pack (Powder 4.5 Kg + Polymer 2.66 Kg) for 35 Sq.ft for 2 layers
Area Coverage: 1 Kg is for applying 1 coat on 1 Sq.m or 10.76 Sq.Ft.
Two coats should be applied horizontally and vertically.
Mixing: Deepseal 201 is supplied in 2 components to generate a consistent slurry (a semi liquid mixture).
Pour the liquid component into a pail followed by the gradual adding of the powder component to the liquid in the pail. Stir the mixture next using a stirrer until the mixture is free from lumps.
Take note of the consistency of the slurry. The consistency of the slurry can be altered by reducing or adding in powder component.
Note: Water or other material should not be added to this mixture.
Application: Apply 2 coats of Deepseal 201 with a stiff brush or spray onto the prepared surface. Interval of each coat should be 1-2 hours minimum.
To avoid pin holes and ensure full coverage, apply each brush coat at different direction.For large space, spray is recommended by using a worm-gear type of spray equipment.For best result, apply Deepseal 201 under shaded shelter to prevent rapid drying of the coating.
Curing & Cleaning. The freshly applied Deepseal 201 shall be protected from direct rain, dirt, oil, grease or other loose particle for at least 12 hours.
It is foot trafficable after 24 hours and resistant to light mechanical stress after 3 days. Permanent water pressure resistance shall be achieved after a full hardening of 14 days.Clean tools and equipment immediately with clean water before the waterproofer sets. Hardened material can only be removed mechanically.
Price stated: Is for the 21.5 Kg Pack
Purchases in larger quantities will be considered for discounts. (Conditions apply)
We undertake to provide Consultancy services on water proofing and our service is available island-wide