Hand Held Metal Scanner

For sale by Top Electronics17 Nov 4:15 pmBatapola, Galle

Rs 4,000

Hand Held Metal Scanner

Item Price : Rs. 4000
100% Brand New.

You can get this item via our courier service or
come at our company.

For the more detail visit our web site

100% brand new and high quality
Streamline design, elegant, high sensitivity.
Light weight, large area detection sensor to detect speed.
Two alarm modes are available: LED light audible alarm or vibrating alarm.
Rugged, free-fall height of one meter without damage.
Voltage indicator / charge indicator timely reminder.
After installation of the rechargeable battery, can be used directly for this product is fully charged.
Electronic detection inspection at airports, railway stations and wharfs;
Security inspection of customs, public securities, frontier defense and safeguard authorities;
Quality inspection of medicine and food commercial systems;
Security inspection of important sites and playgrounds;
Noble metal detection, such as gold or silver jewelry manufacturing plants.
Simple and convenient to use, no adjustment is required;
The detection distance will not be changed when the battery voltage drops from 9V to about 7V;
Low power consumption, can work for 40 hours continuously;
There is automatic and continues alarm when the battery is used up;
Switch on/off audio prompt function;
With external rechargeable socket hole;
Has audio, light and vibration handoff switch

Technical parameters:

Power supply:9V standard battery(not inclued)
Power consumption:max.270MW
Working frequency:22KHZ
Standby current:<8MA
Working voltage:DC 7~12V
Working temperature:-10℃~65℃
Resetting time:0.5s ,sutomatically

Detection range:

This detector sensor sensitivity is to detect metal objects because of the volume, size and density of the surrounding environment
Factor varies. Factory Standard:
Pin 30-60 mm
One yuan coin 75-100 mm
Six inches Tool 160-10mm
20MM Ball 180-195mm
Alarm Indication:

Steady Yellow LED: Target has been detected
Flashing green LED: Power
Flashing red LED: Low Voltage Directive

Alarm signal:

Sound mode Buzzer and red LED
Vibration mode and the red LED
Install and replace battery:

The battery lid can be opened by pushing backward with thumb at the concave groove.
Install the 6F22(9V) battery according to the anode and cathode signs on the battery lid.
Cover with the battery lid and push forward firmly.
Please note battery is not supplied, it can be ordered separately along with separate charger.

Method to use:

Turn on the power switch (2), if a click sound is heard, it indicates that the power has been connected, and the green LED will turn on at the same time. If no click sound is heard, it indicates that no battery has been installed or the battery is not well connected. If the click sound is heard one after another, it indicates that the battery cannot be used any more and a new battery shall be installed.
When the switch-on click sound stops, the highly sensitive detection can be performed. Grasp the handle and detect with the detection face around the object being detected, there will an alarm when a metal object is detected. In the mean time, the green LED will turn into red.
When the detection stops, the alarm stops and the red LED turns into green.

Sensitivity Adjustment:

The sensitivity shall be adjusted when performance instability is observed or sound is produced when detecting human body without any metal stuff because the detection distance is less than the stipulated requirement or the sensitivity is too high.
Insert a small straight-shaped screwdriver into the small hole of the handle of the detector and rotate clockwise, until a sound is head, then rotate counter-clockwise barely to the position where no sound is produced, then rotate for another half a circle, until the sensitivity meets the requirement.


Be sure to switch off the power after use.
Battery shall be taken out when the detector will be kept unused for long.
No sound will be produced when the probe is fixedly positioned to the metal object. Sound is produced only when the probe crosses the metal object.
Be sure to switch off the power (2) when the battery is recharged.
Charger voltage: 12 DC. (The charger shall be self-provided)

Senci green flower garden,
Sri Lanka.

Report this ad


  • 0785806435


Stay safe!

  • Always meet the seller in person
  • Don't pay for anything until you have seen what you are getting
  • Don't send or wire money to anyone you don't know

Watch out for:

  • Unrealistic prices
  • Extra fees
  • Requests for advance payments
  • Requests for personal information

More on staying safe

Share this ad